24-Port Fast Ethernet Switch Management Guide

S YSTEM M ANAGEMENT C OMMANDS
4-76
• This command displays settings for key command modes. Each mode
group is separated by “!” symbols, and includes the configuration mode
command, and corresponding commands. This command displays the
following information:
- Users (names and access levels)
- SNMP community strings
- Event logging configuration
- VLAN database (VLAN ID, name and state)
- VLAN configuration settings for each interface
- IP address configured for VLANs
- Any configured settings for the console port and Telnet
Example
Console#show startup-config
building startup-config, please wait.....
!
username admin access-level 15
username admin password 0 admin
!
username guest access-level 0
username guest password 0 guest
!
enable password level 15 0 super
!
snmp-server community public ro
snmp-server community private rw
!
logging history ram 6
logging history flash 3
!
vlan database
vlan 1 name DefaultVlan media ethernet state active
!
interface ethernet 1/1
switchport allowed vlan add 1 untagged
switchport native vlan 1
.
.
.
interface ethernet 1/26
switchport allowed vlan add 1 untagged
switchport native vlan 1
!
line console
!
line vty
!
end
Console#