24-Port Fast Ethernet Switch Management Guide

P ORT C ONFIGURATION
3-137
Command Attributes
• Mirror Sessions – Displays a list of current mirror sessions.
• Source Unit – The unit whose port traffic will be monitored.
(Range: 1-8)
• Source Port – The port whose traffic will be monitored. (Range: 1-26)
• Type – Allows you to select which traffic to mirror to the target port, Rx
(receive), Tx (transmit), or Both. (Default: Rx)
• Target Unit – The unit whose port will "duplicate" or "mirror" the
traffic on the source port. (Range: 1-8)
• Target Port – The port that will "mirror" the traffic from the source
port. (Range: 1-26)
Web – Click Port, Mirror. Specify the source port, the traffic type to be
mirrored, and the monitor port, then click Add.
Figure 3-59 Configuring a Mirror Port
CLI – Use the interface command to select the monitor port, then use the
port monitor command to specify the source port. Note that default
mirroring under the CLI is for both received and transmitted packets.
Console(config)#interface ethernet 1/10 4-171
Console(config-if)#port monitor ethernet 1/13 4-184