24-Port Fast Ethernet Switch Management Guide

P ORT C ONFIGURATION
3-115
Web – Click Port, Port Information or Trunk Information.
Figure 3-50 Port - Port Information
Field Attributes (CLI)
Basic information:
• Port type – Indicates the port type. (100BASE-TX, 1000BASE-GBIC,
100BASE-FX-S, 100BASE-FX-M, 1000BASE-T, or SFP)
• MAC address – The physical layer address for this port. (To access this
item on the web, see “Setting the IP Address” on page 3-19.)
Configuration:
• Name – Interface label.
• Port admin – Shows if the interface is enabled or disabled (i.e., up or
down).
• Speed-duplex – Shows the current speed and duplex mode. (Auto, or
fixed choice)
• Capabilities – Specifies the capabilities to be advertised for a port during
auto-negotiation. (To access this item on the web, see “Configuring
Interface Connections” on page 3-48.) The following capabilities are
supported.
- 10half - Supports 10 Mbps half-duplex operation
- 10full - Supports 10 Mbps full-duplex operation
- 100half - Supports 100 Mbps half-duplex operation