24-Port Fast Ethernet Switch Management Guide

C ONFIGURING THE S WITCH
3-86
• If a port is disabled (shut down) due to a security violation, it must be
manually re-enabled from the Port/Port Configuration page
(page 3-117).
Command Attributes
• Port – Port number.
• Name – Descriptive text (page 3-114).
• Action – Indicates the action to be taken when a port security violation
is detected:
- None: No action should be taken. (This is the default.)
- Trap: Send an SNMP trap message.
- Shutdown: Disable the port.
- Trap and Shutdown: Send an SNMP trap message and disable the
port.
• Security Status – Enables or disables port security on the port.
(Default: Disabled)
• Max MAC Count – The maximum number of MAC addresses that can
be learned on a port. (Range: 0 -1024)
• Trunk – Trunk number if port is a member (page 3-123).