24-Port Fast Ethernet Switch Management Guide

S IMPLE N ETWORK M ANAGEMENT P ROTOCOL
3-65
swIpFilterRejectTrap 1.3.6.1.4.1.202.20.28.63.2.1.0.40
1.3.6.1.4.1.202.20.41.63.2.1.0.40
1.3.6.1.4.1.202.20.53.63.2.1.0.40
This trap is sent when an
incorrect IP address is
rejected by the IP Filter.
swSmtpConnFailure
Trap
1.3.6.1.4.1.202.20.28.63.2.1.0.41
1.3.6.1.4.1.202.20.41.63.2.1.0.41
1.3.6.1.4.1.202.20.53.63.2.1.0.41
This trap is triggered if
the SMTP system cannot
open a connection to the
mail server successfully.
pethPsePortOnOff
Notification
1.3.6.1.4.1.202.20.41.63.2.1.0.43
1.3.6.1.4.1.202.20.53.63.2.1.0.43
This notification
indicates if a PSE (Power
Sourcing Equipment)
Port is delivering power
to the PD (Powered
Device). This notification
is sent on every status
change except in search
mode.
pethPsePortPower
MaintenanceStatus
Notification
1.3.6.1.4.1.202.20.41.63.2.1.0.44
1.3.6.1.4.1.202.20.53.63.2.1.0.44
This notification
indicates a Port Change
Status and is sent on
every status change.
pethMainPower
UsageOnNotification
1.3.6.1.4.1.202.20.41.63.2.1.0.45
1.3.6.1.4.1.202.20.53.63.2.1.0.45
This notification
indicates PSE Threshold
usage indication is on;
the power usage is above
the threshold.
pethMainPower
UsageOffNotification
1.3.6.1.4.1.202.20.41.63.2.1.0.46
1.3.6.1.4.1.202.20.53.63.2.1.0.46
This notification
indicates that the PSE
Threshold usage
indication is off; the
usage power is below the
threshold.
* These are legacy notifications and therefore must be enabled in conjunction with the
corresponding traps on the SNMP Configuration menu (page 3-52).
Table 3-5 Supported Notification Messages (Continued)
Object Label Object ID Description