Gigabit Ethernet Switch Management Guide

C OMMAND L INE I NTERFACE
4-238
Example
The following example adds a VLAN, using VLAN ID 105 and name
RD5. The VLAN is activated by default.
Related Commands
show vlan (4 -246)
Configuring VLAN Interfaces
Console(config)#vlan database
Console(config-vlan)#vlan 105 name RD5 media ethernet
Console(config-vlan)#
Table 4-58 Configuring VLAN Interfaces
Command Function Mode Page
interface vlan Enters interface configuration mode for
a specified VLAN
IC 4-239
switchport mode Configures VLAN membership mode
for an interface
IC 4-240
switchport
acceptable-frame-types
Configures frame types to be accepted
by an interface
IC 4-241
switchport
ingress-filtering
Enables ingress filtering on an interface IC 4-242
switchport native vlan Configures the PVID (native VLAN) of
an interface
IC 4-243
switchport allowed
vlan
Configures the VLANs associated with
an interface
IC 4-244
switchport gvrp Enables GVRP for an interface IC 4-256
switchport forbidden
vlan
Configures forbidden VLANs for an
interface
IC 4-245
switchport priority
default
Sets a port priority for incoming
untagged frames
IC 4-260