Gigabit Ethernet Switch Management Guide

C OMMAND L INE I NTERFACE
4-210
show mac-address-table aging-time
This command shows the aging time for entries in the address table.
Default Setting
None
Command Mode
Privileged Exec
Example
Spanning Tree Commands
This section includes commands that configure the Spanning Tree
Algorithm (STA) globally for the switch, and commands that configure
STA for the selected interface.
Console#show mac-address-table aging-time
Aging time: 300 sec.
Console#
Table 4-55 Spanning Tree Commands
Command Function Mode Page
spanning-tree Enables the spanning tree protocol GC 4-212
spanning-tree mode Configures STP, RSTP or MSTP mode GC 4-213
spanning-tree
forward-time
Configures the spanning tree bridge
forward time
GC 4-214
spanning-tree hello-time Configures the spanning tree bridge
hello time
GC 4-215
spanning-tree max-age Configures the spanning tree bridge
maximum age
GC 4-216
spanning-tree priority Configures the spanning tree bridge
priority
GC 4-217
spanning-tree
path-cost method
Configures the path cost method for
RSTP/MSTP
GC 4-217
spanning-tree
transmission-limit
Configures the transmission limit for
RSTP/MSTP
GC 4-218