Gigabit Ethernet Switch Management Guide

C OMMAND L INE I NTERFACE
4-12
The access mode shown in the following tables is indicated by these
abbreviations:
ACL (Access Control List Configuration)
GC (Global Configuration)
IC (Interface Configuration)
LC (Line Configuration)
NE (Normal Exec)
MST (Multiple Spanning Tree)
PE (Privileged Exec)
VC (VLAN Database Configuration)
Address Table Configures the address table for filtering specified
addresses, displays current entries, clears the table,
or sets the aging time
4-206
Spanning Tree Configures Spanning Tree settings for the switch 4-210
VLANs Configures VLAN settings, and defines port
membership for VLAN groups; also enables or
configures private VLANs and protocol VLANs
4-235
GVRP and
Bridge Extension
Configures GVRP settings that permit automatic
VLAN learning; shows the configuration for the
bridge extension MIB
4-254
Priority Sets port priority for untagged frames, selects strict
priority or weighted round robin, relative weight
for each priority queue, also sets priority for TCP/
UDP traffic types, IP precedence, and DSCP
4-259
Multicast Filtering Configures IGMP multicast filtering, query
parameters, and specifies ports attached to a
multicast router
4-276
IP Interface Configures IP address for the switch 4-287
Table 4-4 Command Group Index (Continued)
Command Group Description Page