Gigabit Ethernet Switch Management Guide

U SER A UTHENTICATION
3-79
CLI – This example shows the default global settings for 802.1X.
Configuring 802.1X Global Settings
The 802.1X protocol includes port authentication. The 802.1X protocol
must be enabled globally for the switch system before port settings are
active.
Command Attributes
• 802.1X System Authentication Control – Sets the global setting for
802.1X. (default: Disabled)
Web – Select Security, 802.1X, Configuration. Enable dot1X globally for
the switch and click Apply.
Figure 3-37 802.1X Configuration
Console#show dot1x 4-110
Global 802.1X Parameters
system-auth-control: disabled
802.1X Port Summary
Port Name Status Operation Mode Mode Authorized
1/1 disabled Single-Host ForceAuthorized yes
1/2 disabled Single-Host ForceAuthorized n/a
.
.
.
1/47 disabled Single-Host ForceAuthorized n/a
1/48 disabled Single-Host ForceAuthorized n/a
802.1X Port Details
802.1X is disabled on port 1/1
.
.
.
802.1X is disabled on port 1/48
Console#