Gigabit Ethernet Switch Management Guide

C ONFIGURING THE S WITCH
3-64
Web – Click Security, Authentication Settings. To configure local or
remote authentication preferences, specify the authentication sequence
(i.e., one to three methods), fill in the parameters for RADIUS or
TACACS+ authentication if selected, and click Apply.
Figure 3-31 Authentication Server Settings
CLI – Specify all the required parameters to enable logon authentication.
Console(config)#authentication login radius 4-92
Console(config)#radius-server port 181 4-96
Console(config)#radius-server key green 4-96
Console(config)#radius-server retransmit 5 4-97
Console(config)#radius-server timeout 10 4-97
Console#show radius-server 4-98
Remote RADIUS server configuration:
Communication key with RADIUS server: *****
Server port number: 181
Retransmit times: 5
Request timeout: 10
Console(config)#authentication login tacacs 4-92
Console(config)#tacacs-server host 10.20.30.40 4-99
Console(config)#tacacs-server port 200 4-100
Console(config)#tacacs-server key green 4-100
Console#show tacacs-server 4-101
Remote TACACS server configuration:
Server IP address: 10.20.30.40
Communication key with tacacs server: *****
Server port number: 200
Console(config)#