Gigabit Ethernet Switch Management Guide

C OMMAND L INE I NTERFACE
4-162
Command Mode
Global Configuration
Command Usage
• The SNMP engine ID is used to compute the authentication/privacy
digests from the password. You should therefore configure the engine
ID with the snmp-server engine-id command before using this
configuration command.
• SNMP passwords are localized using the authoritative SNMP engine
ID.
Example
show snmp user
This command shows information on SNMP users.
Command Mode
Privileged Exec
Example
Console(config)#snmp-server user steve group r&d v3 auth md5
greenpeace priv des56 einstien
Console(config)#
Console#show snmp user
EngineId: 800000ca030030f1df9ca00000
User Name: steve
Authentication Protocol: md5
Privacy Protocol: des56
Storage Type: nonvolatile
Row Status: active
Console#
Table 4-43 show snmp user - display description
Field Description
EngineId String identifying the engine ID.
User Name Name of user connecting to the SNMP agent.
Authentication
Protocol
The authentication protocol used with SNMPv3.