Gigabit Ethernet Switch Management Guide

SNMP C OMMANDS
4-147
snmp-server
This command enables the SNMPv3 engine and services for all
management clients (i.e., versions 1, 2c, 3). Use the no form to disable the
server.
Default Setting
Enabled
Command Mode
Global Configuration
Example
snmp-server group Adds an SNMP group, mapping users to
views
GC 4-158
show snmp group Shows the SNMP groups PE 4-159
snmp-server user Adds a user to an SNMP group GC 4-161
show snmp user Shows the SNMP users PE 4-162
Console(config)#snmp-server
Console(config)#
Table 4-39 SNMP Commands (Continued)
Command Function Mode Page