Gigabit Ethernet Switch Management Guide

C ONFIGURING THE S WITCH
3-204
• IGMP Version — Sets the protocol version for compatibility with
other devices on the network. (Range: 1-2; Default: 2)
Notes: 1. All systems on the subnet must support the same version.
2. Some attributes are only enabled for IGMPv2, including
IGMP Report Delay and IGMP Query Timeout.
Web – Click IGMP Snooping, IGMP Configuration. Adjust the IGMP
settings as required, and then click Apply. (The default settings are shown
below.)
Figure 3-93 IGMP Configuration
CLI – This example modifies the settings for multicast filtering, and then
displays the current status.
Console(config)#ip igmp snooping 4-277
Console(config)#ip igmp snooping querier 4-281
Console(config)#ip igmp snooping query-count 10 4-281
Console(config)#ip igmp snooping query-interval 100 4-282
Console(config)#ip igmp snooping query-max-response-time 20 4-283
Console(config)#ip igmp snooping router-port-time 300 4-284
Console(config)#ip igmp snooping version 2 4-278
Console(config)#exit
Console#show ip igmp snooping 4-279
Service status: Enabled
Querier status: Enabled
Query count: 10
Query interval: 100 sec
Query max response time: 20 sec
Router port expire time: 300 sec
IGMP snooping version: Version 2
Console#