Gigabit Ethernet Switch Management Guide

ONFIGURING

THE

WITCH

3-172

• Status (Web) – Enables or disables the specified VLAN.

Enable

: VLAN is operational

Disable

: VLAN is suspended; i.e., does not pass packets.

• State (CLI) – Enables or disables the specified VLAN.

Active

: VLAN is operational.

Suspend

: VLAN is suspended; i.e., does not pass packets.

• Add – Adds a new VLAN group to the current list.

• Remove – Removes a VLAN group from the current list. If any port

is assigned to this group as untagged, it will be reassigned to VLAN

group 1 as untagged.

Web – Click VLAN, 802.1Q VLAN, Static List. To create a new VLAN,

enter the VLAN ID and VLAN name, mark the Enable checkbox to

activate the VLAN, and then click Add.

Figure 3-75 Creating Virtual LANs