Gigabit Ethernet Switch Management Guide

C ONFIGURING THE S WITCH
3-104
- 100full - Supports 100 Mbps full-duplex operation
-
1000full - Supports 1000 Mbps full-duplex operation
•Broadcast storm – Shows if broadcast storm control is enabled or
disabled.
• Broadcast storm limit – Shows the broadcast storm threshold.
(500 - 262143 packets per second)
• Flow control – Shows if flow control is enabled or disabled.
• LACP – Shows if LACP is enabled or disabled.
• Port Security – Shows if port security is enabled or disabled.
• Max MAC count – Shows the maximum number of MAC address
that can be learned by a port. (0 - 1024 addresses)
• Port security action – Shows the response to take when a security
violation is detected. (shutdown, trap, trap-and-shutdown)
• Media type – Shows the forced/preferred port type to use for
combination ports
21-24/45-48. (copper forced, copper preferred auto,
SFP forced, SFP preferred auto)
Current status:
• Link Status – Indicates if the link is up or down.
• Operation speed-duplex – Shows the current speed and duplex
mode.
• Port operation status – Provides detailed information on port state.
(Displayed only when the link is up)
• Flow control type – Indicates the type of flow control currently in use.
(IEEE 802.3x, Back-Pressure or none)