TigerSwitch 10/100 8-Port Fast Ethernet Switch Management Guide SMC6709L2

S WITCH S TATIC C ONFIGURATION M ENU
4-23
Console – Click Switch Static Configuration => VLAN Configuration =>
VLAN Configure. Set VLAN Mode to “802.1Q” or “802.1QwithGVRP.”
Set the PVID and Ingress Filtering rules, and save your settings.
Click Switch Static Configuration
=> VLAN Configuration => Create a
VLAN Group. Enter the VLAN Name (1-15 characters) and Group ID
(2-4094). Select a protocol type if you want to create a protocol based
VLAN. Use the Space bar to set each port to transmit tagged or untagged
frames, then save your settings.
TigerSwitch 10/100 : VLAN Support Configuraton
=====================
VLAN Mode :802.1Q
IngressFilter1 IngressFilter2
Port PVID NonMember Pkt Untagged Pkt
-------------------------------------------------------
1. 1 Drop Forward
2. 1 Drop Forward
3. 1 Drop Forward
4. 1 Drop Forward
5. 1 Drop Forward
6. 1 Drop Forward
7. 1 Drop Forward
8. 1 Drop Forward
actions-> <Quit> <Edit> <Save> <Previous Page> <Next Page>
Select the Action menu.
Arrow/TAB/BKSPC = Move Item Space = Toggle Ctrl+A = Action menu
AddaVLANGroup
--------------------------
VLAN Name: [TPS ] VLAN ID: [2 ](1~4094)
Protocol VLAN : None
Port Member
------------------------
1. No
2. No
3. Tagged
4. UnTagged
5. UnTagged
6. No
7. No
8. No
actions-> <Quit> <Edit> <Save> <Previous Page> <Next Page>
Select the Action menu.
Arrow/TAB/BKSPC = Move Item Quit = Previous menu Enter = Select Item