Wireless Print Server With USB Port User Guide

Authentication Type: Open System, Shared Key or WPA/WPA2.

Encryption: WEP-64/128bit for Open System/Shared Key. Or TKIP/CCMP for WPA/WPA2.

TCP/IP Setup:

1. Click Setup, it then appears the sub-menu.

2. Click TCP/IP, it then as shown in the following picture.

DHCP/BOOTP: This option allows you to select DHCP/ BOOTP option. If there is a

DHCP/BOOTP server on your network. This option allows the print server to obtain

IP-related settings automatically from your DHCP server.

IP Address: This option allows you to input IP address from the print server. The IP address

must meet the IP addressing requirements of the network segment.

Note:

On the TCP/IP Setup screen, specify a fixed IP address is highly recommended.