- SMC Wireless Bridge User Guide

4. When you have completed configuring these settings,click

the [APPLY] button to save the settings and reboot the

Wireless Bridge.

5. To configure wireless settings,click on the [Wireless] link on

the left hand navigation menu,and then choose the

[Configuration] option.

From this section,you can configure:

•AP Name

• SSID

•Transmission Rate

•Basic Rate

•Channel

•Preamble

•Beacon Interval

•RTS Threshold

•Fragmentation Threshold

•DTIM Interval

•Authentication Type

•Antenna

• SSID Broadcast

Note: Definitions of these settings can be found in the Glossary

section at the end of this User Guide.

6. When you have completed configuring these settings,click

the [APPLY] button to save the settings and reboot the

Bridge.