- SMC Wireless Bridge User Guide

3.Click the [APPLY] button to complete the reset process.

4.The unit will reboot and reset the SMC2482W.

Using the Web-based Utility to reset the SMC2482W to

factory defaults

1. Log into the SMC2482W using the Web-based Utility.

(See section 4.2 for more information)

2. Click on [Tools]link on the left hand navigation menu,and

then click the [Configuration Tools] option.

3. Click the [Default] button to reset the unit to factory defaults.

4. The unit will reboot and reset the SMC2482W to factory default.

Note: If you set the SMC2482W to be DHCP-enabled and

changed the IP address or wireless settings on the

SMC2482W,you will need to use the Windows Utility to

re-configure the device so you can access the Web-based

Utility again.