Network Card User Manual

AP Mode Utility Configuration
5-5
Figure 5-2. Configuration - Security Setting
Country Region Code — Select the country region where the access point is in
operation.
Beacon (ms) — Set the time invterval between two beacons. (Default: 100ms)
TX Power — Set the access point transmit power. (Default: 100%)
Idle time — Set the idle time. (Default: 300s)
No forwarding among wireless clients — Check the box to prevent traffic being
forwarded among the wireless clients.
Hide SSID — Check the box to hide the access point SSID.
Allow BW 40 MHz — Enable double-width 40 MHz channels for extra throughput.
Table 5-2. Country Channel List
Classification Range
0: USA, Canada, Taiwan CH 1 ~ CH 11
1: Europe CH 1 ~ CH 13
2: Spain CH 10 ~ CH 11
3: France CH 10 ~ CH 13
4: Japan (MKK) CH 14
5: Japan (TELEC) CH 1 ~ CH 14
6: ISRAEL CH 3 ~ CH 9
7: ISRAEL CH 5 ~ CH 13