Network Device Product Manual

Table 9: WPA Setup
Field Description
Authentication Selects Pre-Shared Key (PSK) or 802.1x mode
Method
Passphrase WPA key
Group Re-Key
Time
Group Re-Key interval (seconds)
7.3 Advanced Settings
The Advanced Settings page allows you to configure advanced Radio settings. The
following table describes the setup options in detail.
Table 10: Repeater Advanced Settings Field
Field Description
Beacon Interval Beacon interval (in milliseconds)
RTS Threshold RTS threshold (in bytes)
DTIM Interval DTIM interval
Protection Mode
Allows user to force 802.11g protection (RTS/CTS) mode
off.
Transmit Rate Selects the transmit rate: Auto or a fixed rate
Preamble Type Selects short preamble, long preamble or Auto
7.4 Access Filter
The Access Filter page allows you to configure the Repeater to allow or deny
association to the Repeater based on the client’s MAC address. Up to 32 MAC addresses
can be added to the list. The following table describes the setup options in detail.