Network Device Product Manual

5. Mode Selection
The first step in using the SMCWTK-G is selecting the operating mode. The default operating
mode is the AP mode.
To view the device’s web page, go to 192.168.2.25 (default IP address of the device) in your
web browser. The default username is “admin” and the password is “smcadmin.”
To select a mode, click the Mode tab. Click the radio button next to the desired mode and click
the Apply button. The device will reboot in the selected mode. After the device reboots, click the
Setup button to begin configuring the device.
Figure 7: Mode Page