Network Device Product Manual

3.1.4 Point-to-Multipoint (PMP) Mode
A SMCWTK-G device operating in Point-to-Multipoint (PMP) mode can wirelessly
connect two or more wired networks, as shown in Figure4. The root SMCWTK-G device (LAN
1) operates in PMP mode, and the other SMCWTK-G devices (LAN 2, LAN 3) must operate in
P2P mode.
When operating in PMP mode, the SMCWTK-G device does not allow client
associations. The user must enter the MAC addresses of each (up to six) SMCWTK-G P2P
device into the PMP system's table of Remote AP addresses.
Figure 4: PMP Wireless Bridge