User's Manual

9
SMCRB6741-Z Touchscreen Security System Quick Start Guide
Cancelling the Arming Process
If you arm the system in Arm Away or Arm Stay mode, the Security Status header displays a
countdown of the number of seconds until the Exit Delay expires. You can choose to cancel
the arming process.
To cancel the arming process:
1. Tap the Security Status header while it displays a countdown. The Security app appears
with a keypad and the Disarm System tab is active. The view from the camera(s), if any, is
displayed.
2. Enter your security code to stop the arming process.
Disarming the System
When entering armed premises, an Entry Delay period starts:
 During the Entry Delay, the header changes to announce the number of seconds before
the alarm goes off.
 The Security app displays a keypad.
 The Touchscreen beeps once every second, until the last 10 seconds when it beeps
twice a second.
If a valid keypad code is not entered by the end of the Entry Delay period, an alarm sounds.
For most reasons, from the time an alarm sounds or starts silently, you have 30 seconds
(default) to enter a valid keypad code to disarm the system and prevent an alarm from being
sent to the central monitoring station. This is called the Alarm Transmission delay or the
Abort Window.