User's Manual

SMCRB6741-Z Touchscreen Security System Quick Start Guide

Arming the System from the Touchscreen

To arm the system from the Touchscreen:

1. Tap the Security Status header when it is in Disarmed state. The Security Options screen

appears, with a keypad and the Arm System tab open.

2. Tap an arming mode (Arm Stay, Arm Away, or Arm Night) and enter your security code.

The Security Status header changes to display a countdown message.

The text of the message varies, according to which arming mode you selected.

Observe the following guidelines:

– If you select Arm Away mode, you have until the Exit Delay is over to exit the

premises.

– Otherwise, the system is automatically armed in Arm Stay mode. There is still an Exit

Delay period for the other Arming modes as well, but they do not require that the

door open and close during the period.

– If you open and shut an Entry/Exit door during the Exit Delay and then re-enter the

premise, the Exit delay restarts at 120 seconds for Arm Stay and Arm Night or 60

seconds for Arm Away. It only does this one time. If the wrong code is entered, the

countdown timer resets to 60 or 120 seconds.

– If an Entry/Exit door is left open at the end of Exit Delay, the Entry Delay immediately

starts and, if the system is not disarmed, an alarm sounds.