User's Manual

7
SMCRB6741-Z Touchscreen Security System Quick Start Guide
Arm Stay Mode
Arm Stay mode is used to arm the system when there are people in the premises. The
following rules apply:
 Alarm trips immediately if a monitored Perimeter zone (non-entry/exit door or window) is
opened.
 Interior motion detectors are not armed.
 Entry/Exit zones start an Entry Delay.
 Exit Delay starts when the system is armed.
 Exit Delay does not beep and is twice the length of Alarm Away mode.
Arm Night Mode
Arm Night mode is used when everyone is going to bed.
This mode works the same as Arm Stay mode, except there is no Entry Delay period. If an
entry/exit zone is opened, an alarm sounds immediately.
Note: There is an Exit Delay period that works the same as in Arm Stay mode.
Arming and Disarming the System
The Security status of your security system appears in the Security Status header.
Message that the Security Status header displays
when the status is “Disarmed”. Tap to arm the
system.
Message that the Security Status header displays
when the status is “Armed”. Tap to disarm the
system.