User's Manual

Installing the Security System
Page 5 | August 17, 2010
6. Replace the battery cover and (1)
screw.
7. Use a P1 Phillips screwdriver to
install the (4) screws for the
TouchScreen stand.
8.
Connect the A/C adapter cable
to the back of the TouchScreen,
working the cord through the
stand.
9. Position the TouchScreen near
an unswitched wall outlet (not
controlled by a light switch).
10. If the installation plan does not involve the TouchScreen connecting to the customer’s network
wirelessly, then connect an Ethernet cable to the TouchScreen and the uControl-dedicated
router.