User's Manual

Technician Operations
Page 69 | August 17, 2010
Configuring the Entry/Exit Delay Periods
The Entry Delay period is the amount of time from an Entry/Exit sensor being faulted until an
alarm sounds. The customer has until the end of the Entry Delay period to enter a valid keypad code.
There is no Entry Delay period for Perimeter type sensors (such as window sensors or non-entry
door sensors). There is an audible beeping during the Entry Delay period. This beeping sound is not
configurable and cannot be muted.
The Exit Delay period is the amount of time that starts when the security system is armed. The
customer has this period of time to exit through an Entry/Exit sensor doorway. If the customer does
not exit during this period, the system cannot be armed in Arm Away state. The system will arm in
Arm Stay state. There is an audible beeping during the Exit Delay (once per second) that speeds up
during the last 10 seconds of the Exit Delay (twice per second).
The Entry/Exit Delay periods are configurable by an Installer.
To configure the Entry/Exit Delay periods:
1. From the Installer Settings Menu, touch Security ® Entry And Exit Delay.