User's Manual

Installing the Security System
Page 59 | August 17, 2010
Table 6: Sensor Operations
Operations
Description
Sensors consist of door/window sensors, motion detectors, glass break detectors, and smoke alarms.
Modify sensor details Change (within limits) the details of a sensor (see page 83)
Delete a sensor Remove a sensor from being managed by the
TouchScreen (see page 88).
Use these actions in
sequence to reset a
sensor’s IP/MAC
addresses to factory
default
Add a sensor
Find a new sensor that is available to be added (see
page 85)
Create a cross-zone
association
Configure two sensors to trip an alarm only if they are both faulted (see page
91);
For example, an alarm sounds when a door sensor is faulted ONLY if an
associated motion sensor also is faulted.
View sensor
diagnostics
View the connectivity details and signal strength of a sensor (see page 89)
Manage fire alarm
settings
Toggle Fire Alarm Verification to
determine how the system triggers
fire alarms (see page 79)
By default, the system
immediately contacts the central
monitoring station immediately
whenever a smoke detector goes
into alarm.
Disabled
Central monitoring station
is contacted when one
smoke alarm sounds
Enabled
Central monitoring station
is notified when:
§ Multiple smoke
detectors sound an
alarm
§ One smoke detector
sounds an alarm for 60
seconds.