User's Manual

Installing the Security System
Page 39 | August 17, 2010
1. Touch No I do not want to add a Camera and then Next to skip this operation.
2. Select Yes I want to add a Camera and then Next to skip this operation.
The TouchScreen uploads a binary file multiple times to the system servers to determine the security system’s upload
speed. The screen displays the current calculated upload speed.
Note: The Upload Speed is used by the system to set the default video quality for the camera.
3. Touch Next.
The Hardware Setup screen is displayed.
Figure 31: Camera: Hardware Setup Screen
4. Perform the steps described on the Hardware Setup screen (including connecting a camera to the
TouchScreen’s router with an Ethernet cable and rebooting the camera), and then touch Next.