User's Manual

Installing the Security System
Page 8 | August 17, 2010
C. Ensure your TouchScreen Configuration Information is Correct
1. Ensure you have the following information from Customer Care:
§ Activation Code
§ Broadband Server IP
§ Cellular Server IP
§ Cellular APN
§ Deployment to which the TouchScreen, based on CPE ID, is applied in Inventory
(only if your system uses deployments).
2. On the TouchScreen, touch System Information.
The System Information screen is displayed.
Figure 3: Activation: System Information Screen
3. Touch directly on the Broadband Server value (the IP).
The Edit System Configuration Information screen is displayed.
4. Touch the Broadband Server IP, Cellular Server IP, and the Cellular APN value to change them.
When you touch them, a keyboard screen is displayed. Enter the new values and click Done.
5. After all the values have been set, touch Next.