User's Manual

Page 147 | August 17, 2010
Appendix E: Using the Key Fob
A key fob is a wireless peripheral that lets you remotely perform certain
TouchScreen functions anywhere within RF range of the TouchScreen,
including outside the premises.
§ Check the current system status (armed, disarmed, or “not ready”)
§ Arm the system in Arm Away mode or Arm Stay mode (see the
TouchScreen User Guide for an explanation of arming modes)
§ Disarm the system before entering the premises
§ Send a silent Panic alarm for police assistance
Note: When a key fob button is pressed, the LED flashes red once to indicate that it has contacted
the TouchScreen. If the key fob is out of range of the TouchScreen, the LED flashes red three times
quickly.
Checking System Status
1. Press the button for 1.5 seconds to light the LED to show the current status of the security
system.
2. The LED flashes red once to indicate that it has contacted the system then:
§ Lights green for three seconds if the system is disarmed.
§ Lights red for three seconds if the system is armed.
§ Lights orange for three seconds if the system is not ready to be armed (for example, a door
is open.