User's Manual

C ONFIGURING THE B ARRICADE TM
4-26
PPPoE
Parameter Description
VPI/VCI Enter the Virtual Path Identifier (VPI) and Virtual Circuit
Identifier (VCI) supplied by your ISP.
Encapsulation Select the encapsulation used by ISP from the drop-down
menu.
QoS Class ATM QoS classes including CBR, UBR and VBR
PCR/SCR/MBS QoS Parameters - PCR, SCR and MBS are configurable.
IP assigned by ISP Select yes, if your ISP assigns IP address dynamically.
IP Address If you have selected “No” in the previous field, type in
the IP address provided by your ISP.
Subnet Mask Enter the subnet mask address provided by your ISP.
Connect Type Sets connection mode to Always connected,
Auto-Triggered by traffic or Manual connection. For flat
rate services use Always connected.
Idle Time
(Minute)
Enter the maximum idle time for the Internet
connection. After this time has been exceeded the
connection will be terminated. This setting only applies
when the Connect Type is set to Auto-Triggered by
traffic.
Username Enter user name.
Password Enter password.