User's Manual

Command Line Interface
4-234
4
Example
pvlan up-link/down-link
This command configures uplink/downlink ports for traffic-segmentation client
sessions. Use the no form to restore a port to normal operating mode.
Syntax
pvlan [up-link interface-list down-link interface-list]
no pvlan
• up-link - Specifies an uplink interface.
• down-link - Specifies a downlink interface.
• interface-list – One or more uplink or downlink interfaces. Use a hyphen to
indicate a consecutive list of interfaces or a comma between
non-consecutive interfaces.
• ethernet unit/port
- unit - Stack unit. (Range: 1)
- port - Port number. (Range: 1-26/50)
• port-channel channel-id (Range: 1-32)
Default Setting
None
Command Mode
Global Configuration
Command Usage
• A port cannot be configured in both an uplink and downlink list.
• If a downlink port is not configured, the assigned uplink ports will operate as
normal ports.
Example
show pvlan
This command displays the traffic segmentation configuration settings.
Command Mode
Privileged Exec
Console(config)#pvlan
Console(config)#
Console(config)#pvlan up-link ethernet 1/5 down-link ethernet 1/6
Console(config)#