User's Manual

Access Control List Commands
4-151
4
[no] { permit | deny } untagged-eth2
{ any | host source | source address-bitmask}
{
any | host destination | destination address-bitmask}
[
ethertype protocol [protocol-bitmask]]
[no] { permit | deny } tagged-802.3
{
any | host source | source address-bitmask}
{
any | host destination | destination address-bitmask}
[
vid vid vid-bitmask]
[no] { permit | deny } untagged-802.3
{
any | host source | source address-bitmask}
{
any | host destination | destination address-bitmask}
• tagged-eth2 – Tagged Ethernet II packets.
• untagged-eth2 – Untagged Ethernet II packets.
• tagged-802.3 – Tagged Ethernet 802.3 packets.
• untagged-802.3 – Untagged Ethernet 802.3 packets.
• any – Any MAC source or destination address.
• host – A specific MAC address.
• source – Source MAC address.
• destination – Destination MAC address range with bitmask.
• address-
bitmask
23
– Bitmask for MAC address (in hexidecimal format).
• vid – VLAN ID. (Range: 1-4094)
•
vid-bitmask – VLAN bitmask. (Range: 1-4094)
• protocol – A specific Ethernet protocol number. (Range: 600-fff hex.)
• protocol-bitmask – Protocol bitmask. ( Range: 600-fff hex. )
Default Setting
None
Command Mode
MAC ACL
Command Usage
• New rules are added to the end of the list.
• The ethertype option can only be used to filter Ethernet II formatted packets.
• A detailed listing of Ethernet protocol types can be found in RFC 1060. A few
of the more common types include the following:
- 0800 - IP
- 0806 - ARP
- 8137 - IPX
23. For all bitmasks, “1” means care and “0” means ignore.