Model 2102 Gas Alarm Panel
Sierra Monitor Corporation 1991 Tarob Court, Milpitas, CA 95035 (408) 262-6611 / (800) 727-4377 Fax: 408-262-9042 E-Mail: sierra@sierramonitor.com Model 2102 Gas Alarm Panel APPLICABILITY & EFFECTIVITY This manual provides instructions for the following Sierra Monitor products: Model Description 2102-00 2102-01 Alarm Panel – 2 Channel Alarm Panel – 2 Channel with audible Instruction Manual Part Number: T10004 12/02 Rev.
2102 Alarm Panel Table of Contents 1.0 Product Description ......................................................................................................................................... 1 1.1 Introduction ............................................................................................................................................... 1 1.2 Configuration ..............................................................................................................................
2102 Alarm Panel 1.0 Product Description 1.1 Introduction The Model 2102 is a dual Channel Gas Alarm Panel housed in a NEMA 12, JIC type enclosure. The unit provides DC power for two SMC fixed installation gas monitors of the 200x or 20x series and also provides tow individual relays for activation of remote devices such as alarms, lights or fans. LED indicator on the front of the panel provides visual indication of the “SAFE” or “ALARM” status of each monitor.
2102 Alarm Panel 1.2 Configuration The Model 2102 is available with or without a built in audible alarm at the controller: Model 2102-00: Standard Controller. Model 2102-01: Controller with audible alarm annunciator (common to both gas monitors) installed in the enclosure door. The standard controller is provided with the relays configured for separate activation by their respective gas 2.0 Operation 2.1 Installation Determine suitable locations for the Model 2102 and the fixed gas monitors.
2102 Alarm Panel Terminal 1: Normally open: Connects to Commons during alarm. Terminal 2: Common. Terminal 3: Normally connected to Common: Opens during alarm. Connect the 120 VAC power source to the large terminal strip marked “N” “G” “H” for Neutral, Ground, Hot. Install the protective plate which is provided with the Model 2102 over the AC Connection for safety. As there is no “ON/OFF” switch on the central panel the system will start-up as soon as the supply AC is turned “ON”.
2102 Alarm Panel 3.0 Specifications Enclosure Operating Temperature Input Power Fuse Size Output Voltage Output Current Relays NEMA 3, JIC Type +320 F to 1130 F (00 C to +450 C) 120 VAC, 50-60 Hz 240 VAC available ¼ Ampere 8.3 x 8.3 x 4.4 in (HWD) (20.0 x 20.0 x 10.
2102 Alarm Panel 4.0 Warranty SIERRA MONITOR CORPORATION warrants its products to be free from defects in workmanship or material under normal use and service for two years after date of shipment. SMC will repair or replace without charge any equipment found to be defective during the warranty period. Final determination of the nature and responsibility for defective or damaged equipment will be made by SMC personnel.
