Security Camera User Manual

NOTE After pressing the un-mount button for four seconds, the
Power LED starts flashing. When the Power LED resumes to
the steady amber light, you can remove the USB device safely.
-35-
Screw thread is used
to connect the camera
stand.
Audio-out Connector
is used to connect an
external active speaker.
Reset Button will restart
the camera when it is
pressed quickly; when it is
pressed for five seconds,
the camera will reset to
factory default settings
Ethernet Cable Connector
is used to connect network
cable(RJ-45)
DC Power Connector
is used to connect the
AC power adapter, in
order to supply power
to the camera.
Rear View