802.11g Wireless Hotspot Gateway User Guide

SMCWHSG14-G
28
Item Default Description
Gateway IP Address Empty
Enter the PPTP server Gateway IP address provided by your
ISP.
PPTP Server IP Address Empty Enter the PPTP server IP address provided by your ISP.
Username Empty
Enter the user name provided by your ISP. The user name
can consist of up to 80 alphanumeric characters and is case
sensitive.
Password Empty Enter the user password provided by your ISP. The password
can consist of up to 80 alphanumeric characters and is case
sensitive.
PPP MTU Setting 1460
MTU (Maximum Transfer Unit) specifies maximum
transmission unit size.
TCP MSS Setting 1400
MSS (Maximum Segment Size) specifies maximum segment
size.
Connection ID/Name Empty
Enter the connection ID or connection name. The connection
ID/Name can consist of up to 81 alphanumeric characters
and is case sensitive.
Connect on Demand and Max Idle Time
Connect on Demand Enable You can configure your Wireless Hotspot Gateway to cut
your connection with your ISP after a specified period of time
(Max Idle Time). If you have been disconnected due to
inactivity, Connect on Demand enables your Wireless
Hotspot Gateway to automatically re-establish your
connection as soon as you attempt to access the Internet
again. If you wish to activate Connect on Demand, click the
radio button. If you want your Internet connection to remain,
click the radio button of keep alive. The Max Idle Time
maximum value is 65535 minutes.
Max Idle Time 10 Minutes
Keep alive and Redial Period
Keep alive Disable
This option keeps your PPTP enabled Internet access
connected indefinitely, even when it sits idle. The Redial
Period maximum value is 65535 seconds.
Redial Period 30 Seconds