User's Manual

Table Of Contents
Configuring the Gateway
77
SMCD3GNV Wireless Cable Modem Gateway User Manual
Table 17. Add Blocked Service Menu
Option Description
User Defined Service Enter the service you want blocked.
Protocol The type of protocol associated with the service to be blocked. Choices are:
TCP (default)
UDP
TCP/UDP
Start Port Starting port number on which the block will be applied. If necessary, contact the application
vendor for this information.
End Port Ending port number on which the block will be applied. If necessary, contact the application
vendor for this information.
Always Block? Select whether you want the Gateway to always block this service. Choices are
No = the Gateway does not always block this service. Use the Set Block Time and Set
Blocked Days to instruct the Gateway when to block this service.
Yes = the Gateway always blocks this service until you remove the block. (default)
Set Block Time
Start from If you selected No for Always Block?, select the time when the Gateway is to start blocking
this service.
End on If you selected No for Always Block?, select the time when the Gateway is to stop blocking
this service.
Set Blocked Days
Select All Click this link to select all seven days. This link is not available if you selected Yes for Always
Block?
Select None Click this link to deselect all seven days. This link is not available if you selected Yes for
Always Block?
Monday Sunday Check the check boxes that correspond to the days when you want the Gateway to block this
service. These checkboxes are not available if you selected Yes for Always Block?
SAVE button Click this button to save your settings.
CANCEL button Click this button to discard your settings on the Add Blocked Domain menu.