User's Manual

10
Caution
Installation
Do not touch the plug with wet hands.
Do not install telephone wiring during a lightning storm.
Do not install telephone line jacks in wet locations.
Do not touch uninsulated telephone wires or terminals unless the telephone
line has been disconnected at the network interface.
Use caution when installing or modifying telephone lines The AC adaptor is
used as the main disconnect device.
Ensure that the AC outlet is installed near the product and is easily accessible.
Battery
To reduce the risk of fire or injury to persons, read and follow these
instructions.
Only use the battery specified.
Do not dispose of the battery in a fire, as they may explode. Check with
local waste management codes for special disposal instructions.
Do not open or mutilate the battery. Released electrolyte is corrosive and
may cause burns or injury to the eyes or skin. The electrolyte may be toxic
if swallowed.
Exercise care when handling the battery.
Do not allow conductive materials such as rings, bracelets or keys to
touch the battery, otherwise a short circuit may cause the battery and/or
the conductive material to overheat and cause burns.
Charge the battery provided with or identified for use with this product
only, in accordance with the instructions and limitations specified in this
manual.
11
For Best Performance
Avoiding noise
The base unit and other compatible units use radio waves to communicate with
each other.
For maximum coverage and noise-free communications, place your base unit:
- at a convenient, high, and central location with no obstructions between
the handset and base unit in an indoor environment.
- away from electronic appliances such as TVs, radios, personal computers,
wireless devices or other phones.
- avoid facing radio frequency transmitters, such as external antennas of
mobile phone cell stations (avoid putting the base unit on a bay window or
near a window).
Coverage and voice quality depends on the local environmental conditions.
If the reception for a base unit location is not satisfactory, move the base unit to
another location for better reception.
Environment
Keep the product away from electrical noise generating devices, such as
fluorescent lamps and motors.
The product should be kept free from excessive smoke, dust, high temperature,
and vibration.
The product should not be exposed to direct sunlight.
Do not place heavy objects on top of the product.
When you leave the product unused for a long period of time, unplug the
product from the power outlet.