User's Manual
8
Safety Instructions
When using the handset, basic safety precautions should always be followed
to reduce the risk of fire, electric shock, or personal injury.
1. Read all instructions
2. Follow all warnings and instructions marked on the product.
3. Unplug the product from power outlets before cleaning. Do not use liquid
or aerosol cleaners. Use a moist cloth for cleaning.
4. Do not use the product near water, for example near a bathtub, wash bowl,
kitchen sink, etc.
5. Do not cover slots and openings on the product. They are provided for
ventilation and protection against overheating. Never place the product near
radiators, or in a place where proper ventilation is not provided.
6. Use only the power source marked on the product. If you are not sure of
the type of power supplied to your home, consult your dealer or local power
company.
7. Do not use the product to report a gas leak in the vicinity of the leak.
SAVE THESE INSTRUCTION
9
Warning
To prevent the risk of fire or electrical shock, do not expose the product to
rain or any type of moisture.
If the product emits smoke, an abnormal smell, or makes an unusual noise
unplug the product from power outlets. These conditions can cause fire or
electric shock. Confirm that the phone has stopped emitting smoke and call
your telephone company help desk.
Do not spill liquids (detergents, cleansers, etc.) onto the telephone line cord
plug, or allow it to become wet at all. This may cause a fire. If the telephone
line cord plug becomes wet, immediately pull it from the telephone wall jack,
and do not use.
Do not place or use this product near automatically controlled devices such
as automatic doors and fire alarms. Radio waves emitted from this product
may cause such devices to malfunction resulting in an accident.
Completely insert the AC adaptor/power plug into the power outlet. Failure
to do so may cause electric shock and/or excessive heat resulting in a fire.
Regularly remove any dust, etc. from the AC adaptor/power plug by pulling
it from the power outlet, then wiping with a dry cloth. Accumulated dust
may cause an insulation defect from moisture, etc. resulting in a fire.
Do not excessively pull the receiver cord from the base unit. This may
cause the base unit to fall, resulting in injury.