User's Manual

錯誤
錯誤錯誤
錯誤! 使用
使用使用
使用 [常用
常用常用
常用] 索引標籤將
索引標籤將索引標籤將
索引標籤將 Heading 1 套用到您想要在此處顯示的文字
套用到您想要在此處顯示的文字套用到您想要在此處顯示的文字
套用到您想要在此處顯示的文字
。
。。
。
33
SMCD3GNV Wireless Cable Modem Gateway User Manual
Configuring an Apple
®
Macintosh
®
Computer
The following procedure describes how to configure TCP/IP on an Apple Macintosh running
Mac OS 10.2. If your Apple Macintosh is running Mac OS 7.x or later, the steps you perform
and the screens you see may differ slightly from the following. However, you should still be
able to use this procedure as a guide to configuring your Apple Macintosh for TCP/IP.
1. Pull down the Apple Menu, click System Preferences, and select Network.
2. Verify that NIC connected to the SMCD3GNV3 is selected in the Show field.
3. In the Configure field on the TCP/IP tab, select Using DHCP (see Figure 17).
4. Click Apply Now to apply your settings and close the TCP/IP dialog box.
Figure 17. Selecting Using DHCP in the Configure Field