User's Manual

錯誤
錯誤錯誤
錯誤! 使用
使用使用
使用 [常用
常用常用
常用] 索引標籤將
索引標籤將索引標籤將
索引標籤將 Heading 1 套用到您想要在此處顯示的文字
套用到您想要在此處顯示的文字套用到您想要在此處顯示的文字
套用到您想要在此處顯示的文字
。
。。
。
15
SMCD3GNV Wireless Cable Modem Gateway User Manual
➊
➌
➍
➎
➋
Rear Panel
The rear panel of your SMCD3GNV3 Wireless Cable Modem Gateway contains a reset
button and the ports for attaching the supplied power adapter and making additional
connections. Figure 2 shows the rear panel components and Table 2 describes their
meanings.
Figure 2. Rear View of the SMCD3GNV3 Wireless Cable Modem Gateway
Table 2. SMCD3GNV3 Wireless Cable Modem Gateway Rear Panel Components
Item Description
➊
Reset button Use this button to reset the power or restore the default factory settings (see “Using the Reset
Button” on page 17).
➋
USB USB 2.0 high-speed port for USB-enabled peripherals.
➌
Tel 1-2 Connect an analog telephone to one port and an analog (PSTN) telephone line to the other port.
➍
Ethernet 1-4 Four 10/100/1000 auto-sensing RJ-45 switch ports. Connect devices on your LAN such as a
computer, hub, or switch to these ports.

Cable Connect your coaxial cable line to this port.

Power 110 VAC Connect the supplied power cord.
