User's Manual

錯誤
錯誤錯誤
錯誤! 使用
使用使用
使用 [常用
常用常用
常用] 索引標籤將
索引標籤將索引標籤將
索引標籤將 Heading 1 套用到您想要在此處顯示的文字
套用到您想要在此處顯示的文字套用到您想要在此處顯示的文字
套用到您想要在此處顯示的文字。
。。
。
149
SMCD3GNV Wireless Cable Modem Gateway User Manual
Specifying Services to be Blocked
To block services for non-trusted computers, perform the following procedure from the
Managed Services menu.
1. Next to Enable Managed Services, click Enabled.
2. Under Blocked Services, click ADD. The Add Blocked Service menu appears (see Figure
88).
3. Complete the fields in the Add Blocked Service menu (see Table 43).
4. Click SAVE (or click CANCEL to discard your settings). If you clicked SAVE, the blocked
service appears below Blocked Services on the Managed Services menu.
5. To block additional services, repeat steps 2 through 4.
6. To edit a blocked service, click the EDIT button next to the blocked service you want to
modify, edit the settings on the Add Blocked Service menu (see Table 43), and click SAVE.
7. To delete a blocked service, click the X next to the service. When the Delete Service Block
Rule message appears, click OK to delete the blocked URL or CANCEL to retain it. If you
clicked OK, the service is removed from Blocked Services on the Managed Services
menu.