User's Manual

81
SMCD3GNV4 and SMCD3GNV4E Wireless EMTA Gateway Administrator Manual
Table 23. Remote Management Page Options
Option Description
Remote Management HTTP To allow the Gateway to be managed remotely using HTTP, click Enabled and enter the port number
on which the Gateway can be accessed. Default port is 8080.
Remote Management HTTPS To allow the Gateway to be managed remotely using HTTPS, click Enabled and enter the port number
on which the Gateway can be accessed. Default port is 443.
Remote Management SSH To allow the Gateway to be managed remotely using SSH, click Enabled and enter the port number on
which the Gateway can be accessed. Default port is 22.
Remote Management Telnet To allow the Gateway to be managed remotely using Telnet, click Enabled and enter the port number
on which the Gateway can be accessed. Default port is 23.
Remote Access Allowed From
ADD ONE TRUST IP button To designate individual IP addresses as trusted and permitted to perform remote management, enter
the IP address in the IP Address field and then click this button.
ADD RANGE TRUST IP button To designate a range of IP addresses as trusted and permitted to perform remote management, enter
the starting IP address in the Start IP field and the ending range in the End IP field, and then click this
button.
Any Computer To allow any computer to configure the Gateway remotely, regardless of IP address, click this option.