User's Manual

42
SMCD3GNV4 and SMCD3GNV4E Wireless EMTA Gateway Administrator Manual
Table 10. WPS Page Options
Option Description
WPS Lets you enable or disable WPS. If you click Enabled, complete the remaining fields on the page.
Security A read-only field that shows the Gateway’s security settings.
Encryption A read-only field that shows the Gateway’s encryption settings.
AP PIN A read-only field that shows the Access Point’s personal identification number.
Connection Options Select the method used to make the WPS connection between wireless devices and the Gateway. Choices are:
• Push Button = select this option to use the WPS button on the top panel of the Gateway and the wireless device to
make the connection.
• Pin Number = select this option to enter an 8-digit PIN to configure WPS. If you select this option, you must enter the
same 8-digit PIN in both the Gateway and the wireless client to make the connection.
PAIR button Click this button and push the WPS button on the wireless client to create the connection. The connection is made within
two minutes. You can also press the WPS button on the front panel of this Gateway to initiate WPS instead of clicking the
PAIR button.