User's Manual

SMCD3GNV4 and SMCD3GNV4E Wireless EMTA Gateway Administrator Manual

Configuring WPS Settings

Using the WiFi page (described on page 33) or the Computers page (described on page 56), you can

enable or disable the Gateway’s WPS operation and configure the connection options for WPS push

button or pin number operation.

Note: You must enable WPS before a wireless device can connect to the Gateway using WPS.

To configure WPS settings:

1. From the WiFi or Computers page, click the ADD WIFI PROTECTED SETUP (WPS) CLIENT button.

The WPS page appears (see Figure 22).

2. Complete the options in the WPS page (see Table 9).

Figure 23. WPS Page