User's Manual

34
SMCD3GNV4 and SMCD3GNV4E Wireless EMTA Gateway Administrator Manual
Table 7. Public Lan Configuration Options
Option Description
Enable/Disable Public Lan Enables or disables the static IP address settings specified on this page.
• Enable = the Gateway uses the static IP address settings defined on this page. If you click Enable, complete the
remaining fields on the page.
• Disable = the Gateway does not use the static IP address settings defined on this page.
IP Address When Enable/Disable Public LAN is enabled, enter the Gateway’s IP address using the format 00.00.00.00.
IP Subnet Mask When Enable/Disable Public LAN is enabled, enter the subnet mask using the format 00.00.00.00. You can select an
appropriate subnet mask based on the number of devices that will connect to your network.
Primary DNS When Enable/Disable Public LAN is enabled, enter the primary domain name system IP address from your ISP.
Secondary DNS When Enable/Disable Public LAN is enabled, enter the secondary domain name system IP address from your ISP.
Mode Config Enables or disables static IP addressing for the Gateway.
• True Static = configures the Gateway to use the static IP address settings configured on this page.
• Off = the Gateway does not use a static IP address.