User's Manual

32
SMCD3GNV4 and SMCD3GNV4E Wireless EMTA Gateway Administrator Manual
Table 6. Local IP Configuration Page Options
Option Description
Gateway Address Enter the Gateway’s IP address using the format 00.00.00.00.
Subnet Mask Enter the subnet mask using the format 00.00.00.00. You can select an appropriate subnet mask based on the number of
devices that will connect to your network.
DHCP Beginning Address Enter the starting IP address in the range of IP addresses that the DHCP server will allocate. Because the Gateway’s
default IP address is 192.168.0.1, the Beginning Address must be 192.168.0.2 or greater.
DHCP Ending Address Enter the ending IP address in the range of IP addresses that the DHCP server will allocate. Because the Gateway’s
default IP address is 192.168.0.1, the Ending Address must not exceed 192.168.0.251.
DHCP Lease Time Enter the amount of time that a network device is allowed connection to the Gateway using its current dynamic IP address.
Use the drop-down box to select Minutes, Hours, Days, Weeks, or Forever. When this lease time expires, the device is
assigned a new dynamic IP address automatically.