User's Manual

SMCD3GNV4 and SMCD3GNV4E Wireless EMTA Gateway Administrator Manual

Table 4. Web Management Interface Menus and Submenus

Menus and Submenus Description See Page

Parental Control > Managed Sites Configures blocked sites, blocked keywords, and trusted computers.

Parental Control > Managed Services Configures blocked services and trusted computers.

Parental Control > Managed Devices Configures managed and blocked devices.

Parental Control > Reports Generates, prints, and downloads reports based on user-defined criteria.

Advanced > Port Forwarding Enables or disables the Gateway’s port forwarding feature.

Advanced > Port Triggering Enables or disables the Gateway’s port triggering feature.

Advanced > Remote Management Configures the ways in which the Gateway can be managed remotely.

Advanced > Routing Configure the Routing Information Protocol (RIP) used by the Gateway to

exchange routing information with the headend

Advanced > DMZ Configures a computer for unrestricted two-way Internet access.

Advanced > QoS Configures the Gateway to deliver better resource reservation control.

Advanced > Device Discovery Enables or disables the Gateway’s Universal Plug and Play (UPnP)

feature for dynamic connectivity to devices on the network.

Advanced > VPN > VPN Global Enables or disables the Gateway’s VPN settings

Advanced > VPN > IPSEC Tunnel Configure Internet Protocol Security (IPsec) tunnels on the Gateway.

Troubleshooting > Logs Generates, prints, and downloads reports based on user-defined criteria.

Troubleshooting > Diagnostic Tools Tests connectivity to an IP address.

Troubleshooting > Restore/Reboot Reboots the Gateway, reboots the Wi-Fi router only, restores Wi-Fi

settings only, or restores factory settings.

100

Troubleshooting > Change Password Changes the password used to log in to the Gateway’s Web interface.

101

MSO Screen Provides access to configuration screens that show basic hardware

information, Event Log, basic WAN information, and DHCP information.

102